by: Mr Mudguard
$276.00
New round cold rolled fenders / guards Made from 11 gauge aluminum
Flat Top: Fenders are flat across the top
Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside
Use: Usually used on enclosed trailers built to almost maximum width, horse floats (axle spread around 34 Inches / 863mm)
Part Number: TTTSR 2.5 102A
Dimensions:
Width – 2.5 Inches / 64 mm
Length – 102 Inches / 2591 mm
Height – 17 Inches / 432 mm
Stretch Out – 118 Inches / 2997 mm
Gauge – 11 / 2.30 mm USG
Weight – 4.5 Kg
*Stretch out is the distance from the front lip of the guard over the top around to the back lip (circumference)
$325.00
New round cold rolled fenders / guards Made from 16 gauge bright mild steel Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Car, boat, utility, custom, enclosed trailers (axle spread around 34 Inches / 863mm) Part Number: TTTSR 10 102 TRI : Width – 10 Inches / 254 mmLength – 102 Inches / 2591 mm Height – 17 Inches / 432 mmStretch Out –...
$480.00
New round cold rolled fenders / guards Made from 11 gauge Smooth Aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Car, boat, utility, custom, enclosed trailers (axle spread around 34 Inches / 863mm) Part Number: TTTSR 10 102 TRI A : Width – 10 Inches / 254 mmLength – 102 Inches / 2591 mm Height – 17 Inches / 432 mmStretch Out – 118 Inches / 2997...
$325.00
Fender Steps/Brackets Lot of 4 Made from 14 Gauge Mild Steel For use with single axle and tandem axle trailers, profile cut and formed to fender radius. Mounting holes pre drilled, will suit 7.5", 9", 10", 11", 12" and 13" wide fenders. Note: Two outer edges are not welded to allow for final fitting. Brackets are 11" (279 mm) wide and need to be trimmed to suit your fender. This width will also allow brackets to be welded to trailer side and allow for double radius fenders to be bolted...
$265.00
Fender Steps/Brackets Lot of 4 Made from 14 Gauge Mild Steel For use with single axle and tandem axle trailers, profile cut and formed to fender radius. Mounting holes pre drilled, will suit 7.5", 9", 10", 11", 12" and 13" wide fenders. Note: Two outer edges are not welded to allow for final fitting. Brackets are 11" (279 mm) wide and need to be trimmed to suit your fender. This width will also allow brackets to be welded to trailer side and allow for double radius fenders to be bolted...