- Continue Shopping
- Your Cart is Empty
Aluminum Fenders and Guards
This is our range of Hand Rolled Aluminum Fenders. These unique sizes and light weight guards are specifically suited to Custom Street, Race Cars and light weight trailers. Popular for tubbing and one tonner ute trays as well. If custom sizing is needed or you would like advice fitting and mounting, please call us today.
DR526RTA - 5" by 26" Round Top Single Axle Smooth Aluminum Guard
$96.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm up to 45mm Round Top: Fenders have a slight radius across the top Use: Hot rod / custom bikes, etc Part Number: DR 5 26 RTA : Width – 5 Inches / 127mmLength – 26 Inches / 661mmHeight – 12.75 Inches / 324mmStretch Out – 40.5 Inches / 1029mmGauge – 11 / 2.30mm USGWeight – 1.5 Kg *Stretch out is the...
DR529RTA - 5" by 29" Round Top Single Axle Smooth Aluminum Guard
$100.00
New round cold rolled fenders / guards Made from 11 gauge smooth aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm up to 45mm Round Top: Fenders have a slight radius across the top Use: Hot rod fenders / custom bikes, etc Part Number: DR 5 29 RTA : Width – 5 Inches / 127 mmLength – 29 Inches / 732 mm Height – 15.75 Inches / 400 mmStretch Out – 48 Inches / 1219 mmGauge – 11 / 2.30...
DR531RTA - 5" by 31" Round Top Single Axle Smooth Aluminum Guard
$110.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm up to 45mm Round Top: Fenders have a slight radius across the top Use: Hot rod fenders / custom bikes, etc Part Number: DR 5 31 RTA : Width – 5 Inches / 127mmLength – 31 Inches / 787mm Height – 14.5 Inches / 368mmStretch Out – 48 Inches / 1219mmGauge – 11 / 2.30mm USGWeight – 1.75 Kg *Stretch out...
DR7.526A - 7.5" by 26" Double Radius Single Axle Smooth Aluminum Guard
$120.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm Flat Top: Fenders are flat across the top Use: Hot rods, custom bikes, Clubman, Lotus 7, Caterham 7 race car, etc Part Number: DR 7.5 26 A : Width –7.5 Inches / 190 mmLength – 26 Inches / 661 mmHeight – 12.75 Inches / 324 mmStretch Out – 40.5 Inches / 1029 mmGauge – 11 / 2.30 mm USGWeight – 1.75...
DR922.25RTA - 9" by 22.25" Round Top Single Axle Smooth Aluminum Guard
$99.00
New round cold rolled fenders / guards Made from 11 gauge smooth aluminium Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm up to 45mm Round Top: Fenders have a slight radius across the top Use: Mini tubs, golf buggy, tiny boat trailer fenders, yard trailers, 12 inch rims Part Number: DR 9 22.25 RTA : Width – 9 Inches / 229 mmLength – 22.25 Inches / 565 mm Height – 12 Inches / 306 mm Stretch Out – 35 Inches /...
DR926RTA - 9" by 26" Round Top Single Axle Smooth Aluminum Guard
$130.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm Round Top: Fenders have a slight radius across the top Use: Hot rods, custom bikes, Clubman, Lotus 7, Caterham 7 race car, teardrop caravans Part Number: DR 9 26 RTA : Width – 9 Inches / 229 mmLength – 26 Inches / 661 mmHeight – 14.63 Inches / 371 mmStretch Out – 44.25 Inches / 1124 mmGauge – 11 /...
DR1026A - 10" by 26" Single Axle Smooth Aluminum Guard
$140.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm Flat Top: Fenders are flat across the top Use: Hot rods, custom bikes, Clubman, Lotus 7, Caterham 7 race car, teardrop caravans Part Number: DR 10 26A : Width – 10 Inches / 254mmLength – 26 Inches / 661mmHeight – 13.75 Inches / 349mmStretch Out – 42.75 Inches / 1086mmGauge – 11 / 2.30mm USG *Stretch out is the distance...
DR1230A - 12" by 30" Double Radius Single Axle Smooth Aluminum Guard
$170.00
New round cold rolled fenders / guards Made from 11 gauge Aluminum Double Radius: When the fenders have a radius on both outer and inner edges of at least 30mm Flat Top: Fenders are flat across the top Use: Tubbing, drag cars, custom street, race cars, one tonner trays, etc Part Number: DR 12 30A : Width – 12 Inches / 305 mmLength – 30 Inches / 762 mmHeight – 15.75 Inches / 400 mmStretch Out – 48.25 Inches / 1226 mmGauge – 11 / 2.30 mm USGWeight – 3 Kg...
SR1330A - 13" by 30" Single Radius Single Axle Smooth Aluminum Guard
$170.00
New round cold rolled fenders / guards Made from 11 gauge Aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Tubing, drag cars, custom street, race cars, one tonner trays, etc Part Number: SR 13 30 A : Width – 13 Inches / 330 mmLength – 30 Inches / 762 mmHeight – 15.38 Inches / 391 mmStretch Out – 48 / 1219 mmGauge –...
DR17.530RTA - 17.5" by 30" Round Top Single Axle Smooth Aluminum Guard
$312.00
New round cold rolled fenders / guards Made from 11 gauge smooth aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm Round Top: Fenders have a slight radius across the top Use: Drag car tubs, custom street, etc Part Number: DR 17.5 30 RTA : Width –17.5 Inches / 445 mmLength – 30 Inches / 762 mmHeight – 16 Inches / 406 mmStretch Out – 48 Inches / 1219 mmGauge – 11 / 2.30 mm USGWeight – 4 Kg *Stretch out...
DR17.533RTA - 17.5" by 33" Round Top Single Axle Smooth Aluminum Guard
$318.00
New round cold rolled fenders / guards Made from 11 gauge smooth aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm Round Top: Fenders have a slight radius across the top Use: Drag car tubs, custom street, etc Part Number: DR 17.5 33 RTA : Width –17.5 Inches / 445 mmLength – 33 Inches / 838 mmHeight – 17 Inches / 432 mmStretch Out – 51.75 Inches / 1314 mmGauge – 11 / 2.30 mm USGWeight – 4.5 Kg *Stretch out...
TTSR1060A - 10" by 60" Single Radius Tandem Teardrop Smooth Aluminum Guard
$270.00
New round cold rolled fenders / guards Made from11 gauge aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Car, boat, utility, custom, enclosed trailers (axle spread around 29 Inches / 750mm) Part Number: TTSR 10 60A : Width – 10 Inches / 254 mmLength – 60 Inches / 1524 mm Height – 17 Inches / 432 mmStretch Out – 80 Inches / 2032...
TTSR1066A - 10" by 66" Single Radius Tandem Teardrop Smooth Aluminum Guard
$320.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Horse floats, car, boat, utility, custom, enclosed trailers (axle spread around 33 Inches / 850mm) Part Number: TTSR 10 66A : Width – 10 Inches / 254 mmLength – 66 Inches / 1676 mm Height – 17 Inches / 432 mmStretch Out – 86...
FB30A - 30" by 14.4" Single Axle Smooth Aluminum Fender Back
$62.00
Made from: .090 Inch / 2.29mm Smooth Aluminium Use: Can be used with DR 17.5 30A Part Number: FB 30A : Length – 30 Inches / 762mm Height – 14.4 Inches / 366mmGauge – .090 Inch / 2.29mm USGWeight – 1 Kg
FB33A - 33" by 16.5" Single Axle Smooth Aluminum Fender Back
$62.00
Made from: .090 Inch / 2.29mm Aluminium Use: Can be used with DR 17.5 33A Part Number: FB 33A : Length – 33 Inches / 838 mm Height – 16.5 Inches / 419 mmGauge – .090 Inch / 2.29 mm USGWeight – 1 Kg
SR1.2530A - 1.25" by 30" Single Axle Smooth Aluminum Flare
$87.00
New round cold rolled flares Made from 11 gauge aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Single flares can be either used on single axle enclosed trailers, tandem and / or tri-axle enclosed trailers, etc Part Number: SR 1.25 30A : Width – 1.25 Inches / 32 mmLength – 30 Inches / 762 mm Height – 15.38 Inches / 391 mmStretch Out...
SR1.2532A - 1.25" by 32" Single Axle Smooth Aluminum Flare
$99.00
New round cold rolled flares Made from 11 gauge aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Single flares can be either used on single axle enclosed trailers, tandem and / or tri-axle enclosed trailers, etc Part Number: SR 1.25 30A : Width –1.25 Inches / 32 mmLength – 32 Inches / 813 mm Height – 15.38 Inches / 391 mmStretch Out –...
TTTSR2.5102A - 2.5" by 102" Triple Teardrop Axle Smooth Aluminum Flare
$276.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Usually used on enclosed trailers built to almost maximum width, horse floats (axle spread around 34 Inches / 863mm) Part Number: TTTSR 2.5 102A : Width – 2.5 Inches / 64 mmLength – 102 Inches / 2591 mm Height – 17 Inches / 432...
TTSR2.566A - 2.5" by 66" Tandem Teardrop Axle Smooth Aluminum Flare
$216.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Usually used on enclosed trailers built to almost maximum width, horse floats (axle spread around 33 Inches / 850mm) Part Number: TTSR 2.5 66 A : Width – 2.5 Inches / 64 mmLength – 66 Inches / 1674 mm Height – 17 Inches / 432...
DR1028RTA - 10" by 28" Round Top Single Axle Smooth Aluminum Guard
$150.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm Round Top: Fenders have a slight radius across the top Use: Hot rods, custom bikes, Clubman, Lotus 7, Caterham 7 race car, teardrop caravans Part Number: DR 10 28 RTA : Width – 10 Inches / 254mmLength – 28 Inches / 711mmHeight – 14 Inches / 355mmStretch Out – 44 Inches / 1118mmGauge – 11 / 2.30mm USG *Stretch out...
TTTSR10102TRIA - 10" by 102" Single Radius Triple Teardrop Axle Smooth Aluminium Guard
$480.00
New round cold rolled fenders / guards Made from 11 gauge Smooth Aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Car, boat, utility, custom, enclosed trailers (axle spread around 34 Inches / 863mm) Part Number: TTTSR 10 102 TRI A : Width – 10 Inches / 254 mmLength – 102 Inches / 2591 mm Height – 17 Inches / 432 mmStretch Out – 118 Inches / 2997...
DR1760APBLeft - 17" by 60" - 379 Peterbilt Smooth Aluminum Guard Left Side
$998.00
Made from .090 gauge aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 50mm Round Top: Fenders have a slight radius across the top Peterbilt: Outer edges are rolled and swaged for strength This fender is sold per unit – replacement 379 Peterbilt fender Part Number: DR 17 60 PB A Left (See our other listing for right side) : Width –17 1/8 Inches / 434mmLength – 60 Inches / 1522mmHeight – 26.5 Inches / 672mmStretch Out – 86 Inches /...
DR17 60A PB Right - 17" by 60" - 379 Peterbilt Smooth Aluminum Guard Right Side
$998.00
Made from .090 gauge aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 50mm Round Top: Fenders have a slight radius across the top Peterbilt: Outer edges are rolled and swaged for strength This fender is sold per unit – replacement 379 Peterbilt fender Part Number: DR 17 60 PB A Right (See our other listing for left side) : Width –17 1/8 Inches / 434mmLength – 60 Inches / 1522mmHeight – 26.5 Inches / 672mmStretch Out – 86 Inches /...
SR929A - 9" by 29" Single Radius Single Axle Smooth Aluminum Guard
$142.00
New round cold rolled fenders / guards Made from 11 gauge Aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Tubing, drag cars, custom street, race cars, one tonner trays, etc Part Number: SR 9 29 A : Width – 9 Inches / 229 mmLength – 29 Inches / 732 mmHeight – 14.5 Inches / 368 mmStretch Out – 49 / 1244 mmGauge – 11 / 2.30 mm...
TTSR1.2566A - 1.25" by 66" Tandem Teardrop Axle Smooth Aluminum Flare
$205.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Usually used on enclosed trailers built to almost maximum width, horse floats (axle spread around 33 Inches / 850mm) Part Number: TTSR 1.25 66 A : Width – 1.25 Inches / 32 mmLength – 66 Inches / 1676 mm Height – 17 Inches / 432...
© 2024 Mr Mudguard. Designed by Out of the Sandbox. Ecommerce Software by Shopify
